TEAM Stockwerk
Your reliable partner for LFT Pultrusion Technology
Our Competence: everything from fibers to LFT-pellets
TEAM Stockwerk is a group of dedicated engineers with many years of LFT experience
What we stand and work for
Our comprehensive range of professional services is aimed at a wide range of customers, from newcomers to experienced producers of LFT products.
Take the next step with us
Complete LFT Pultrusion Lines
We plan, build and install LFT pultrusion lines with high-quality components from our own production and proven partners for the production of LFT granulates.
Modernization
We build and supply individual LFT-components and refurbish existing LFT pultrusion lines, independantly of their manufacturer
Process Control
An essential part of our LFT pultrusion lines is the Process Control Unit. With a central operating panel it controls the complete line and communicates with components having their own control system (e.g. extruder).
Technology Consulting
We carry out individual consulting on modernizing and optimizing existing LFT pultrusion lines. The focus is usually on increasing throughput, improving quality, and introducing new products.
Project Management
Our professional project management ensures that the plan is effectively and efficiently turned into reality.
Installation, Commissioning, Training
We install the plant or let it install under our supervision. We commission the new line, carry out fine-tuning, and increase performance to the agreed production level. Incidentally, we conduct training courses for the operator team, service people and production managers.
Who we are
Dipl.-Ing. Christian Stock
Owner of STOCKWERK Maschinenbau
Design engineer and manufacturer of LFT-components, such as creel rack, tensioner, impregnation die, puller, cooling section, pelletizer
many years experience with LFT-technologies
Dr.-Ing. Achim Fingerle
Process Engineer specializing in LFT pultrusion technology, with expertise in drying, dosing, and conveying of plastic materials
Concept, design, installation and commissioning of more than 10 LFT pultrusion lines worldwide
Dipl.-Ing. Ralf Werheid
Electrical Engineer, many years experience with electrical engineering, software development, installation, commissioning
How we work
Our solutions are based on many years of experience and systematic analysis by using modern analysis tools
Evaluating melt viscosity and adjusting optimally to the impregnation process
Separating waste from product
Best impregnation requires paying particular attention to the spreading and pre-heating of the fibers.
Various methods and techniques are used to assess the quality of impregnation.
Evaluating fiber distribution within a test specimen. Even if the fiber distribution is uniform in the end product, you have already done a lot right.
Good impregnation leads to even fiber distribution across the granulate cross-section.
Our LFT Pultrusion Lines
Discover our LFT pultrusion lines in 3 sizes for customer-specific applications:
8 strands, for universal use, designed for high temperature processing and a line speed up to 50 m/min
Based on glass fibers with 2400 Tex the following throughput is reachable, if the raw material allows it:
| Fiber Content | Line Speed | Throughput |
|---|---|---|
| 30% | 50 m/min | 175 kg/h |
| 50% | 50 m/min | 105 kg/h |
36 strands, batch operation mode, with focus on either polyolefins or (alternatively) polyamides, designed for a line speed up to 50 m/min. Based on glass fibers with 2400 Tex the following throughput is reachable, if the raw material allows it:
| Fiber Content | Line Speed | Throughput |
|---|---|---|
| 30% | 50 m/min | 800 kg/h |
| 50% | 50 m/min | 500 kg/h |
72 strands, high throughput, rarely change products, with focus on either polyolefins or (alternatively) polyamides, designed for a line speed up to 50 m/min. Based on glass fibers with 2400 Tex the following throughput is reachable, if the raw material allows it:
| Fiber Content | Line Speed | Throughput |
|---|---|---|
| 30% | 50 m/min | 1.600 kg/h |
| 50% | 50 m/min | 1.000 kg/h |
These are basic types. Finally, each system is individually customized to your requirements.
Beside the impregnation die, the line control system is the heart of our LFT pultrusion lines. Equipped with a central operating panel this Process Control Unit controls the complete LFT pultrusion line and communicates with components having their own control system (e.g. extruder).
The user interface on 22″ touch panel has proven itself with many customers. It can be installed in a housing whichever you prefer.
All important process parameters are displayed to the operating team. Warnings and alarms show the operating team the need for action.
Starting page, showing all relevant parts of the LFT pultrusion line.
Trends can be recorded from selected process parameters.
Texts in local language, if requested
The corresponding PLC software (Siemens) and HMI software (Siemens) is written by us and, if necessary, adapted to your individual requirements.
We add communication interfaces for production (e.g. scanner) and for production planning (OPC-UA) on your request.
Our control is equipped with remote access, so that online support can be provided at any time.
Our Technology Consulting Services
Our consulting services are designed to ensure your success. We are asked because we know how and why it works.
Our consulting services are specifically aimed at companies that operate LFT- systems and are looking for expert support in technical matters. It does not matter who originally built or supplied your system.
Do one or more of the following questions sound familiar to you?
You are to produce a new LFT granulate. Initial tests on your plant show that it is not really working well. Who can we ask for advice?
You should get spare parts, but the LFT-line is either homemade in the distant past or the manufacturer no longer exists. Who can manufacture the parts needed?
The impregnation die is getting on in years. Meanwhile, the melt is leaking out in several places. Who can assess the situation on site and manufacture the necessary parts for us?
With your existing puller, it is no longer possible to increase the strand tension. Actually, it should also pull a little faster. Who can assess the situation on site and advice whether to modernize or install a new one?
Your operators are still responsible for setting the production parameters. However, in addition to consistent quality, your customers now also require documentation of the production parameters. Who can assess the situation on site and offer a plant control system?
The operators have made suggestions as to how the plant should be modernized. Which measures are effective and how much will they cost?
If yes, we can provide support with these issues
We are ready when you need us. Consulting can take place within online meetings. However, we also visit your production facility to discuss any questions directly with you at your line. We adapt to your requirements and wishes.
Who our customers are
You are asking who our customers are?
We do not disclose our clients to the public. We strictly respect the agreed confidentiality.
All our customers have something in common: they are renowned manufacturers of high-quality LFT products.
Their production facilities are spread across many countries. The following country distribution may give you a small indication of our radius of action.
